Blue Screen Of Death (BSOD) is one of the most dreaded issues one may face in Windows operating system. There are several subcategories in which BSOD may attack your system. One of the Blue Screen of Death issues that you can be inflicted with is Bad Pool Caller. This is also referred to as error code 0x000000C2. This can be a result of outdated or corrupt drivers. We will find a few tips on how to fix Bad Pool Caller Error.
What is Bad Pool Caller Error?
As stated before, it is one of BSOD symptoms affecting the system. It is caused because of multiple reasons. It may be necessary to find the exact reasons so that you can troubleshoot the issue.It is not possible to find the exact reasons for the occurrence of this syndrome. The issue can strike your computer at any stage. It can occur while you are installing a program. It can attack you while your computer is starting up. Whenever it occurs, it crashes your system.
You may also face the issue after installing a new hardware, or software. This can specifically happen if there are any incompatible drivers.
What causes Bad Pool Caller Error?
There isn’t a single reason that causes the Bad Pool Caller error. It can happen as result of multiple causes. Before you set out to fix the error, you may need to ascertain the exact reason that caused the issue. The error can up because of the corrupt or outdated driver. A recently installed hardware or software can also cause the error to occur. Some of the other possible causes include
Virus or Malware attack that has bypassed your anti-virus solution.
Your Registry entries may have gone wrong or corrupted.
Even the corrupt memory issues can also create trouble.
How to Fix Bad Pool Caller Error?
There are several ways you can employ to take care of Bad Pool Caller error on your system. Since the issue can be caused by many reasons, the solutions too may differ. You can try the solutions we have provided here one by one. HJopefully, one of them will sort out your issue of Bad Pool Caller Error.
Method 1 – System File Checker Option Here you go with the steps –
Go into the Advanced Boot Mode. You may need to check your computer or laptop documentation on how to enter the Advanced Boot Mode on your device.
Boot into Safe Mode in the Advanced Mode.
Enter Command Prompt and enter sfc/scannow.
Once the System File Checker completes scan, exit Command Prompt.
Under Windows search bar, look for Windows Memory Diagnostics.
In the next screen, locate the option Restart now and check for problems
Windows will now reboot and scan for memory issues.
Restart your computer and check if the issue still persists.
Method 2 – Run Memtest86 MEMTEST86 is a third party software that helps you diagnose the issue of Bad Pool Caller. You will be able to run it outside the Windows environment. This will let it eliminate all the memory errors that may be causing the Bad Pool Caller error. Here is how you can go with it.
Connect USB Drive to your computer. Please note that you will need to have access to another computer to be able to download the file on your USB drive.
Visit the link http://memtest.org/download/5.01/memtest86+-5.01.usb.installer.zip to downlaod the USB Key for MEMTEST86.
Right Click on the zip file you downlaoded in the above step, and choose Extract Here
Run the file Memtest86+ USB Installer from the extracted folder.
You should now get the option to choose the USB location. Select the USB Drive plugged in to your computer.
This step burns the Memtest 86 on your USB drive. Please note that your flash drive will be formatted.
So, now you have created a USB drive with the Memtest 86. Now, let us use it on the affected PC. Follow the steps below –
Insert the USB to the PC that is affected.
Restart the PC. Ensure that the Boot from Flash Drive is chosen.
Memtest will now begin testing your memory corruption on your system.
Check if all the tests are successful. If no issues are found, your issue should get resolved. If there is any memory corruption, it will be shown as unsuccessful in some steps.
If you come across any issues, you may need to change RAM.
Method 3 – Use Eventviewer
Checking EventViewer can help you pinpoint the exact reason for the BSOD you faced. Make sure you can enter Windows 10. If you are not able to enter Windows, you can use Safe Mode for the purpose. Follow the steps here below –
Key in Windows Key and R to enter Run dialog box.
Type in eventvwr.msc in the Run box and press ENTER.
In the Event Viewer that opens, look for the Windows Logs and then locate Application.
Find the latest event that says ERROR.
This will let you find the errors, and if you find an error, you can then search for the exact problem and how you can solve the issue.
The Final Thoughts
Well, there can be several reasons that the Bad Pool Error can hit your computer. Depending upon the reasons, the fixes also differ. It may not be possible to point out the exact fixes without knowing the reasons. Apart from the fixes listed here above, you may also check for the recently added software and hardware. Check all the ports and connections. Uninstall the recently added hardware or software and check if the issue gets resolved. The System Restore option can also restore the corrupted files and thereby sort out the Bad Pool Caller error. Running the System Restore Utility in the Safe Mode can be more effective means of getting a better solution.
The fixes mentioned above should solve the Bad Pool Caller Error or Error 0x000000C2. If you have any more options that can be helpful in getting rid of the Bad Pool Caller Error, do share your views and opinions with us. Your feedback will be much helpful to our readers.
Timmappa Kamat is a technology enthusiast. An ardent lover of gadgets and gizmos, he loves sharing his knowledge through the tech savvy websites. Having made a humble beginning in the area of content writing, he has established himself with a few clients as a good content provider.