by Are you interested in woodworking and looking for a way to make it more challenging?
There are a lot of reasons why you’d want to make a gunstock. Not only can it look sharp, but it can be more comfortable to hold, too.
Still not convinced? Keep reading this guide to learn how to make a gunstock. Let’s get started!
The First Step on How to Make a Gunstock
The first step in making a gunstock is shaping the stock of a gun, it is important to start with the forestock. Forestock is the forward part of the stock that supports the barrel and action of the gun. The most important thing to consider when shaping the stock is its grip.
The grip is on the part that the shooter will hold onto and needs to be comfortable. The next thing to consider is the comb. The comb is the top part of the stock that the shooter’s cheek will rest on.
Buttstock is the rear part of the stock that the shooter will hold against their shoulders.
Cutting Stock to Length
When cutting stock to length, it is important to first make sure that the stock is secured in a vise or saw. Next, you will want to measure the desired length of the stock and make a pencil mark at that point. Once it is marked, you will want to set the saw blade to the correct depth and make sure that the fence is squared up with the blade.
After the fence is set, you can then make the cut by pushing the stock through the blade. If you want to train cutting stock, you can find virtual reality gunstocks and do your training, it is easy because it’s virtual.
The final thing to consider is the length of the pull. The length of the pull is the distance from the trigger to the back of the buttstock.
Inlet the Barrel Channel
It is important to take your time and work. It is also important to make sure that the channel is cut oversize so that the barrel will fit and not be able to move. To do this, you will need to use a Dremel tool or something similar.
Start by making a small pilot hole in the stock, then enlarge it until it is the correct size. Take your time and make sure that the channel is smooth and even. Once you are finished, you can then install the barrel and secure it in place.
Finishing Stock
This can be done in a variety of ways, but the most common method is to stain and/or varnish the wood. This will help protect the wood and give it a nice appearance. Use a polisher and buffing tools to make it stand out.
This includes the trigger, trigger guard, and other metal components, once everything is in place, your gunstock guide is complete.
Enjoy Your Gunstock
It’s time to put it all together and enjoy your new gunstock. The first step on how to make a gunstock is to shape your gun. Second, When measuring for length, it needs to determine the amount of the butt that will be covered by the grip.
The third is inlet the barrel, this is done by drilling outholes along the centerline of the channel. Last is to finish the stock, you will need to buff and polish it to create a smooth and shiny surface.
Do you find this article helpful? Read more of our blogs today!
